MOP & MARGIN / PRACTICAL QUOTING GUIDES

How to include travel time and vehicle costs in a cleaning quote

November 3, 2026 · By Mop & Margin

A customer asks for a price for three hours of cleaning. The house is twenty minutes away. Before quoting, write down two things: how much of your day the trip uses, and what it costs to take the vehicle there. Driving time and vehicle use belong on separate lines in your estimate, even if you give the customer one price.

What does a 40-minute trip add?

Suppose this is your only job on the route. The round trip is 18 miles and takes 40 minutes. For this fictional example, you value your time at $30 an hour and allow $0.60 per mile for the vehicle. Neither number is a recommended rate.

Hypothetical round trip for one job
Quote inputCalculationAllowance
Owner travel time40 minutes ÷ 60 × $30$20.00
Vehicle use18 miles × $0.60$10.80

The trip adds $30.80 to modeled costs. Keep the minutes unrounded until you calculate dollars. This is a cost input, not an automatic $30.80 customer surcharge. Add cleaning time, supplies and your other job costs before choosing a price. The worked cleaning quote shows how a target margin and payment fees affect that decision.

What changes when two homes share a route?

Sketch the trip you actually expect: base to the first home, first home to the second, second home back to base. Use one consistent rule to assign each leg, including the return. Check that the minutes and miles assigned to both visits add back to the route totals.

For example, suppose the whole route takes 60 minutes and covers 24 miles. If you allocate it equally, each visit gets 30 minutes and 12 miles. At the same fictional rates, each carries $15.00 of owner time and $7.20 of vehicle cost. The two $22.20 allowances add up to $44.40, the cost of the whole route. Equal shares are one option. If one home regularly requires a detour, record that leg separately so you can see which job uses the time.

Choose what your mileage figure includes

Write down how you built your per-mile allowance. If it already includes fuel and routine repairs, adding fuel receipts again overstates the trip cost. If insurance is already in monthly overhead, leave it there or move its business share into the vehicle allowance, but count it only once. Add parking or tolls separately only if your allowance excludes them.

The IRS guide to business use of a car explains mileage and actual-expense methods for tax purposes. Neither sets the price of a cleaning job. The $0.60 used here is a fictional planning input, not an IRS rate or a deduction. Base your internal estimates on your own records.

After the visit, check what changed

Say the original 40-minute round trip took 55 minutes, but the miles and parking were unchanged. At the example $30 hourly allowance, the extra 15 minutes adds $7.50 to modeled owner time. There is no reason to add miles you did not drive. Note whether the delay was unusual or likely to recur before changing the next estimate.

For your next quote, write down five inputs: travel minutes, your hourly time allowance, route miles, what your vehicle allowance includes, and any separate parking or tolls. Compare the estimate with the completed-job cost review after the visit.

Use the free Before You Quote checklist to gather the rest of your inputs. The $29 Cleaning Business Numbers Kit includes a quote calculator for estimates and a separate tracker for reviewing completed jobs.

Would you handle the drive differently? Try the five-minute quote exercise and tell us which trip costs you would include. You can do it on paper. No purchase needed.